That's what I've been doing, but that doesn't seem to help the tool doesn't recognize my controller by default.
Anyway I think you just have to select "Enable XInput"
That seemed to work for me!!!
| Nasomi Community FFXI Server https://na.nasomi.com/forum/ |
|
| Controller set up. https://na.nasomi.com/forum/viewtopic.php?f=7&t=13955 |
Page 1 of 1 |
| Author: | Moedified1 [ Sun Jun 07, 2020 6:00 pm ] |
| Post subject: | Controller set up. |
I have the controller set up correctly with the ffxi pad config, but the gaming window does not recognize a contoller is being used. |
|
| Author: | omen285 [ Mon Jun 08, 2020 12:53 pm ] |
| Post subject: | Re: Controller set up. |
What controller are you using? |
|
| Author: | Moedified1 [ Mon Jun 08, 2020 7:48 pm ] |
| Post subject: | Re: Controller set up. |
I've tried with both xbox one and ps4 controllers. |
|
| Author: | BoxShark227 [ Tue Jun 09, 2020 2:31 am ] |
| Post subject: | Re: Controller set up. |
I have a similar problem. I can go to my setting on my PC and it shows that my input is being picked up but when I do the same through nasomi's gamepad configuration tool tests nothing picks up, besides the vibrations. |
|
| Author: | Shambles [ Tue Jun 09, 2020 11:32 am ] |
| Post subject: | Re: Controller set up. |
Went through this yesterday. Run as admin and use one of the default button configurations (you can edit it later). |
|
| Author: | Eyo [ Tue Sep 01, 2020 4:10 am ] |
| Post subject: | Re: Controller set up. |
That's what I've been doing, but that doesn't seem to help the tool doesn't recognize my controller by default. Anyway I think you just have to select "Enable XInput" That seemed to work for me!!!
|
|
| Author: | The_Carrot [ Tue Sep 01, 2020 5:20 am ] |
| Post subject: | Re: Controller set up. |
you need xbox360_64eng.exe it's a driver for xinput on hids, usually comes bundled with xbox accessories for windows, but if u don't want the cheezy overlay draggin ur ram down, you only need that driver. enable xinput in ffxi config > gamepad setup, use alternate setup E. if you enable xinput you'll likely find that the switchmon app no longer functions correctly, it's not made for xinput. to solve this you can get the xinputplus ver4.15.2.zip and unzip it and run it as admin, start with selectingtarget program as wherever your switchmon folder is. Then detect gamepad, hit a button and select the gamepad it come from, enable all the drivers, then disable xinput. You'll need to look through the tabs to find all that, anyways apply settings to the switchmon app and it should work per usual. Gave this advice to many people I known that had gamepad issues and it's 100% the fix, older game vs newer Microsoft things, best of luck. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|